P700 Mould Vibration Concrete Block Making Machine

Designed capacity
30 000m3/year (size 400x200x200mm)
Cycle time
15 ÷ 25 s
Power
14.5 Kw
Vibration
Mould vibration
Pallet
Plastic: 700x450x20mm; Wooden: 700x450x20mm
Warranty
12 months
Place of origin
DMC Vietnam
Workers
12 workers/2 shifts (include loading & unloading workers)
Factory area
666 m2 (include finished products yard)
Contact to order +84 376 377 123
Share:

The meaning of name “DmCline P700 Concrete block making machine”

DmCline P700:

DmCline means the brandname of concrete block production line with the designed cycle from 15 to 25 seconds.

P700 means the mould vibration technology. One time can press 03 pieces size 400x200x200, equivalent to 30.000 m3/year (equivalent to 20.000.000 standard pieces of 220x105x60).

Introduction about mould vibration block making machine

Block making/pressing machine with mould vibration technology, also known as multi-point vibration (omnidirectional vibration), the feature of this technology is vibration force located in the mould core.

In 2018, DMC has successfully manufactured concrete block making/pressing machine with vibration technology, code P700 with the capacity of 20 million standard pieces per year. As semi-automatic machines, it is designed compactly, towards the family-scale production segment or production at construction sites.

The advantages of DMCLINE P700: Intelligent control system, automation, fast cycle time, low noise, anti-stracification of product, low burr surface… DMCLINE P700 is the best choice for the block with the height of over 200mm and thin partition.

Technical Specifications of P700 concrete block making machine

Designed capacity

30 000m3/year (size 400x200x200mm)

Cycle time  

15 ÷ 25 s

Power

14.5 Kw

Vibration 

Mould vibration

Khay đỡ gạch

Plastic: 700x450x20mm

Wooden: 700x450x20mm

Warranty

12 months

Place of origin

DMC Vietnam

Workers

12 workers/2 shifts (include loading&unloading workers)

Factory area

666 m2 (include finished products yard)

The number of workers to operate P700 concrete block pressing machine

Factory manager1 worker
Worker for operating machine3 workers
Worker for operating dumper0 worker
Worker for operating forklift1 worker
Worker for loading wet block7 workerS
Worker for cleaning up0 worker

Factory area of P700 concrete block making machine: 666 m2

Workshop90 m2
Area for drying wet blocks576 m(for 16 hours)
Area for containing finished products -
Area for input materials -
Area for office and others-
Area for interal yards and trees-

Technology description mould vibration concrete block production

Technology description mould vibration concrete block production

(1) Hoist tipping bucket: Hoist the aggregates (grind stone, sand, thermol slag, ect) to planetary mixer.

(2) Planetary mixer: aggregates, water and cement are mixed together as specification setting

(3) Belt conveyor: transfer materials after mixing to block making machine

(4) Block making machine: Being designed with motor transmitting force to eccentric shaft, which is mounted directly on the mould. The rotary of eccentric shaft will creats centrifugal vibrating force into mould to forms block with high quality and uniformity.

(5) Block conveyor: Clean the surface and transfer block bale to block stacker

(6) Block stacker: Receive the block bale from block stacker. Then, workers pull to yard to dry

Production process of P700 concrete block 

Production process of P700 concrete block

(B1) Step 1: The workers feed stone, sand, cement to planetary mixer and mix the materials together.

(B2) Step 2: The vibrating machine forms blocks as the template. The workers must usually check to adjust machine to limit fault product.

(B3) Step 3: After forming, the workers pull blocks to the yard to dry from 18 to 24 hours 

Related products

©2018 DmCline All rights reserved

Leave your telephone number,
DMCLINE will contact you to consutant